Skip to main content

Saks Fifth Avenue - Spam City

I'm really quite tired of the Spam that looks a lot like advertisements from Saks Fifth Avenue.

Here's the story:

I have an email address that I only use with my friends. I don't hand it out to retailers, and I don't reply to anyone I don't know very well with my email address.

However, somehow I got on a mailing list that is sending out "Saks Fifth Avenue" related advertisements on an almost DAILY basis. I've never shopped or purchased anything from a Sak's store of any kind, yet someone has decided that I deserve an inordinate amount of information about stuff I'm not interested in.

Did someone steal my email address off of one of my friend's address book? Was my address published on-line and scraped from somewhere? Did someone somehow get ahold of my email address and sell it to some "bulk email" agency? I certainly don't know, and these spams don't even make a claim on where they got their list.

All I know is that I get a Saks-branded email almost once a DAY. Insane. Retailers don't cold-call people once a day. But that's what they're doing to me, just via email. So I find it incredulous that Saks would be behind this.

I think my best strategy is to mark this garbage as Spam/Junk, protecting me and countless others from this insane misuse of email. Evidently a LOT of other people mark these messages as junk, as they advise users to put their email address within their "address book". Ha! Good thing we're not all so stupid.

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release the right

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou

Fixing my Wahl 9918 Groomsman Beard and Mustache Trimmer

Not everyone would bother repairing a $25 beard trimmer, but why not fix something for under $5 instead of spending another $25? My  Wahl 9918 Groomsman Beard and Mustache Trimmer  has admirably performed its beauty duty for many years, but the time came when the battery just wasn't holding a charge any more.  Most people would just put the trimmer in the trash and buy a new one, but I figured I could repair my otherwise excellent Wahl and save some money. In fact, even high priced trimmer and rotary shaver brands, like Norelco and Remington, can be easily repaired using a process similar to the one I used to fix my Wahl.  Read on to find out how. I opened up the Wahl by popping off the black plastic faceplate with a tiny flathead screwdriver, which revealed two screws.  By removing the two screws I was able to easily open up the unit, revealing the guts of the device. Backplate off, Revealing the screws The internals are rather simple: a motor, a simple circuit boar

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu

Macintosh: Upgrading an eMac

It's been a long time since I wrote this article, but the fact remains: The good old eMac can still be useful if you take the simple steps to keep it as good as it can be.  All can run Tiger, and most can run Leopard - great operating systems for their day with a bit of useful life.  This article describes the procedure I used to upgrade my old eMac, including: Replacing the internal hard disk with a large capacity drive. Increasing the memory for performance Upgrading the operating system Here I'm upgrading a 700 MHz eMac, but the procedure and tasks for upgrading other eMac models should be almost identical. Upgrading versus Replacing My sister's eMac is of the 700 mhz variety, with 256 MB of memory. The machine seemed to be getting "slower", and the original 40 GB disk was becoming jammed packed with photos and iTunes, and within a few months she'd be out of disk space. There were two options to address the problems: upgrade the eMac, or go o

Fix a bad MacBook trackpad

The Problem: A Poorly-Behaving Trackpad Button MacBook trackpads buttons are going bad. Happily, there is a quick and technically-simple fix that may work for many MacBook owners with a misbehaving trackpad. A few months ago I started to notice that my trackpad was operating in a funky manner. The trackpad button had lost its solid click and turned mushy. As I typed the trackpad button would mistakenly register clicks, and the cursor would jump all over the place; The cursor would jump around and my words would end up jumbled. Or a button press wouldn't register at all, and I'd end up trying to smash down of the button with no response. It was the worst experience I’ve ever had with a keyboard and mouse. I tried every technique I could find on the web to try to fix my bad trackpad button – from sliding paper through the gap around button, to MacBook disassembly and vacuuming everything. Nothing made it better. My MacBook was fairly unusable, and getting worse. Af

Other Posts

Show more