Skip to main content

Connecting your MIDI keyboard to your Mac

MIDI and the Mac.  It's easy, fun, and shockingly inexpensive!

I enjoy fooling around with musical instruments, and so when Garageband originally came out several years ago, I was very excited to start using it with my cheap little Casio keyboard.

Initially it seemed expensive and complicated to get the right parts together to connect the Mac to my keyboard via MIDI. I didn't want to spend a ton of money in professional-class electronics. I wanted to fool around.

Happily, I discovered that it's inexpensive and easy.  If you know where to look, a Mac-compliant MIDI adapter can be purchased for under $10! That's right, for less than $10 I connected my Mac to my MIDI keyboard and by MIDI drum kit.

I bought an MIDI-to-USB interface, in particular, one like this really inexpensive USB MIDI Cable available through Amazon. The adapter is a simple device that has a MIDI "in"/"out" connectors on one end, and a USB connector on the other.  The adapter doesn't require a power adapter - it's just a magic converter that translates MIDI into USB.

The beauty of this interface is that it required no special drivers for my Mac at all. My Mac, running Mavericks (and Lion before that) automatically detected it. Awesome.

I connected the MIDI-in connector on the cable to the MIDI-out port on my keyboard. And then I plugged the USB plug into my Mac. Hookup was that simple.

MIDI "out" cable goes to MIDI "in" port, and vice-versa

From there, I fired up the Garage Band application and turned on the keyboard. In Garageband, I created a new "Piano Project".

I started by creating a new "Piano" project

Once the new project appeared within Garageband, notes on my keyboard were coming out of my Mac's speakers. If this doesn't work, you may want to double check your volume and make sure that the "in" and "out" MIDI cables are plugged into the "out" and "in" on your keyboard.

From there, I was able to double-click on the Piano icon within the "tracks" view in order to change the instrument of my key presses to something else, like a sax. Do so reveals the Software Instrument selector.

Double-clicking on the piano icon sets you change the instrument


The Software Instrument list is fun and amusing



Since we play musical instruments in the house quite often, I decided to connect the Mac to an amplifier. I used a basic 3.5mm jack plugged into the headphone port of the Mac. I connected this to a small guitar amp.

Connecting a small guitar amp to the Mac

It's a good idea to turn down the volume on the amp before plugging or unplugging your Mac from it.

Next Steps

My next step is to experiment more deeply with GarageBand and some of the add-on instrument packs. Some add-on packs for GarageBand include:
That's my initial attempt to get started with MIDI on the Mac. It works great, but there is a lot more to try! Have fun!

Labels:

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release the right
Read more

Fixing my Wahl 9918 Groomsman Beard and Mustache Trimmer

Not everyone would bother repairing a $25 beard trimmer, but why not fix something for under $5 instead of spending another $25? My  Wahl 9918 Groomsman Beard and Mustache Trimmer  has admirably performed its beauty duty for many years, but the time came when the battery just wasn't holding a charge any more.  Most people would just put the trimmer in the trash and buy a new one, but I figured I could repair my otherwise excellent Wahl and save some money. In fact, even high priced trimmer and rotary shaver brands, like Norelco and Remington, can be easily repaired using a process similar to the one I used to fix my Wahl.  Read on to find out how. I opened up the Wahl by popping off the black plastic faceplate with a tiny flathead screwdriver, which revealed two screws.  By removing the two screws I was able to easily open up the unit, revealing the guts of the device. Backplate off, Revealing the screws The internals are rather simple: a motor, a simple circuit boar
Read more

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu
Read more

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou
Read more

Adding a Water Flood Sensor to my Vista-20p alarm system

My Honeywell Vista 20p alarm system is fairly comprehensive, but I want one more feature: an alarm that lets me know when my sump pump isn't working properly. Here is how I added one for about $8 in special parts.   I'm afraid of a flood in my finished basement. I'm fortunate - my basement sump pump system is already redundant, with two independent pumps and two outflow pipes. The primary pump kicks in when the water level reaches 6 inches, and if that doesn't work, then the backup pump kicks in when the water level reaches 7 inches.  The backup pump should never kick in unless the primary pump is having a problem pumping.   But there is a problem with this setup: I might never know if my primary pump has failed, leaving me with no redundancy.  I want to be informed when I have one (or god forbid, two) pump failures. My goal is to have my Vista 20p alert me when the sump's water level is ever beyond the point where my primary pump should have kicked in, alerting me
Read more

The Yamaha DD-65 and YDD-60 Digital Drums

Almost everyone I know who is into drums should get their hands on the Yamaha DD65 . It's a low cost, fun little kit that you can throw in your car to jam with your buddies. It's a lot easier than throwing your gear in your Subaru. The DD-65, also known as the YDD-60. Eight pads in a pretty package. I've owned the older, venerable DD-55 for about five years. The DD-55 is the ancestor of the newer DD-65, and is an evolution of the DD-50, which was first released some time in the mid 1990s. I just put my DD-55 on this light snare drum stand it's ready for some jamming. The classic DD-55. Seven pads of rockin' fun, since about 2001. Yes, everyone will tell you that the DD-55 isn't actually a real drum kit. No kidding. However, a skilled drummer can get some great sound out of this little box, and you can definitely keep the band together with it. Plus, it's perfect for apartment living.
Read more

Other Posts

Show more