Skip to main content

Extending Battery Life

So you have a smartphone or laptop that you've owned for a year or two and the battery seems to lose charge very quickly.  However, some batteries in a friend's identical device seems to have lasted for years longer!  So what's the deal?

The deal is that modern devices use lithium-ion batteries, and it is very easy to mistakenly misuse a lithium-ion battery. 

What?  A misuse a battery?  How does THAT happen?

The common killer of lithium-ion batteries is heat.  Heat just sucks the life out of a lithium-ion battery, and they never, ever recover.  My goal for battery care is to always avoid unreasonable heat.  So here's the short list of the rules I follow for long battery life:
  • Never leave a device in a car.  Cars interiors can get very hot.  If I leave my device in the car even once for 15 minutes, where the temperature can get over 120 °F, I have forever stolen some life out of my battery's soul.
  • Never leave a device in the hot sun.  This is really a variation of the above statement.
  • Never use cheap, generic chargers.  A cheap charger can send poor quality power to a device, and then the device needs to smooth out and reduce that voltage to something it can safely use.  All that voltage smoothing results in substantial heat - which, as we now know, kills batteries. 
  • Never use "fast chargers".  Fast chargers inject more energy into a device over less time, resulting in more heat and more stress on the battery.  It's best to use a normal charger, and avoid speed-charging.
  • If a device feels hot, restart it.   Bad software can spin out of control, resulting in a lot of internal heat production.  A restart terminates all software and gives it a chance to behave normally.  And make sure the device's software is up-to-date.  Up-to-date software is less likely spin out of control and heat up a device.
  • Never let a battery completely discharge.  Once a lithium battery is allowed to sit for months without a charge, it might not be recharge-able.  I never store a device with very low charge, and I never let a device sit for several months without charging it up.
Other myths to debunk:

I think the following silly ideas come from the age of the NiCad batteries of the 1970s.
  • Do not purposefully "drain" or "calibrate" a battery.  Doing so simply weakens the battery.
  • Do not worry about "overcharging" a battery.  All modern devices have a managed charging system.  These systems are necessary to protect the battery and to prevent event leaks, fires, and explosions. Attempting to trick the charging system will only reduce battery life.
Buying a replacement battery

It can be hard to buy a replacement battery.  First-party manufacturers (like Samsung, Apple, Dell, etc) all charge quite a lot for a battery.  But the battery they sell you has a real warranty and will certainly be of higher quality.

Third party suppliers generally sell batteries without a warranty.  Some might claim they offer a warranty, but most don't provide any mechanism to make a warranty claim.   That's no warranty.  Furthermore,  some of these 3rd party batteries can be ill-fitting, low-powered, and can have very short useful lives.  But they are very inexpensive, often one quarter of the price of a manufacturer's battery.

I almost always buy 3rd party batteries on Amazon.  Here are the 3rd party battery purchases that I have been happy with.  Of course, double-check your model number before buying anything!

Popular posts from this blog

Fixing a SodaStream Jet, part 1: Disassembly Guide

I've had my SodaStream Jet for years, and once in a while something has gone wrong. Disassembly is the first step to repair.  Start with this article to see how to disassemble the SodaStream, and then once you have that down, scroll through my other articles to see how I repaired specfic SodaStream problems. SodaStream Jet Disassembly Guide Tools Required Flat head screwdriver Phillips head screwdriver 1. Remove the Carbonator.  Duh. 2. Remove the black panel lever The front big black tilt lever needs to be removed first. Removing this panel is tricky, but it isn't impossible. Looking up at the bottom of the black panel, there are two tabs, one on the left and one on the right. These tabs fully secure the panel in place. The trick is to use a flat-head screwdriver under the plastic to gently lever the tabs out of the way.  Note in the pictures how I approach these tabs with my screwdriver.  I usually release the left side first, and then I release the right
Read more

Sodastream Carbonator Leakage, Usage, and Weight

SodaStream 60L "Carbonator" CO2 cylinders have a specific weight when empty, plus about 410 or so grams for the CO2 they should have when they're "full".  A little while ago I went to buy a replacement Carbonator from my local hardware store. The dealer pulled a new Carbonator out of the box and sensed it was lighter than usual.  He put the "light" Carbonator in the "empty" pile and sold me a different one.  At that moment I concluded that it would be smart of me to weigh both new and empty SodaStream carbonators.  Here are the results. Weighing a SodaStream Carbonator - for both Science and Consumer Protection.       The dealer told me that sometimes the carbonators leak after they leave the SodaStream filling facility.  That means there could be an opportunity for customers like me to get ripped off! The SodaStream cylinders I buy claim to have a net product weight of 410 grams - and that means that a full Soda Stream Carbonator shou
Read more

Fixing my Wahl 9918 Groomsman Beard and Mustache Trimmer

Not everyone would bother repairing a $25 beard trimmer, but why not fix something for under $5 instead of spending another $25? My  Wahl 9918 Groomsman Beard and Mustache Trimmer  has admirably performed its beauty duty for many years, but the time came when the battery just wasn't holding a charge any more.  Most people would just put the trimmer in the trash and buy a new one, but I figured I could repair my otherwise excellent Wahl and save some money. In fact, even high priced trimmer and rotary shaver brands, like Norelco and Remington, can be easily repaired using a process similar to the one I used to fix my Wahl.  Read on to find out how. I opened up the Wahl by popping off the black plastic faceplate with a tiny flathead screwdriver, which revealed two screws.  By removing the two screws I was able to easily open up the unit, revealing the guts of the device. Backplate off, Revealing the screws The internals are rather simple: a motor, a simple circuit boar
Read more

Fixing a SodaStream Jet, Repair #2 - Broken Fill Button

My Soda Stream Jet's fill button broke, which means I can not longer carbonate water by pressing the pushbutton. This caused all sorts of grief in my household. Here is how I managed to repair my Jet to give it another 10 years of life (hopefully). First, a look at the button The fill button on the top of the SodaStream is actually a simple lever. Pressing down on the button moves a pin that does the actual work of pressing open the Carbonator's valve. Unfortunately, the axis point is fairly thin and can see a lot of stress. That's where my Soda Stream button cracked. [ I think the usage tip here is "don't over-press the button like a gorilla, it doesn't do anything but put high stress on the button."] Cracked levering point of the button The Pesky Lever Retaining Pin The Fix It was pretty easy for me to replace the button: Take off the back of the Soda Stream and remove the carbonator. Push out the the button lever's steel retaining pin. This takes qu
Read more

MacBook: burnt out magsafe connector repair

My MacBook (A1342 model from 2009-2010) stopped working, thanks to a cheap knockoff magsafe charger. The magsafe connector looked burnt with heat-distorted melted plastic and some black carbon surfaces.  Plugging in the charger resulted in no lights and no action.  My MacBook was dead. First I tried to clean up the connector with some Q-Tips, tooth picks and solvent, but that did little, as seen in this "after" picture (below).   The heat generated by the aftermarket charger permanently deformed and distorted the MacBook's magsafe connector.  Clearly the damage was significant. Burnt Magsafe Connector - Replacement Required! Looking at iFixIt , I determined that it would not be difficult to replace only the magsafe connector with the right tools.  I hoped and prayed that the problem was isolated to the connector assembly and not the logic board. I bought a replacement magsafe connector assembly (available from Amazon) for under $20 and started to replace it by
Read more

Dustbuster Switch Repair

My Dustbuster vacuum - a CHV-1410, gets a lot of use.  We use it several times per day, every day.  It is a workhorse. Sadly, it was becoming unreliable.  It would be fully charged, and I'd hit the switch and maybe it would begin to start and then stop, or it would lurch and stop - or maybe it would do nothing. My CHV-1410 had a broken switch At first I thought it was the battery, but then I found that by carefully wiggling the switch I was sometimes able to get the vacuum to work.  All that on-off action over the years made the switch unreliable. Instead of throwing away an otherwise perfectly good vacuum, I decided to replace the worn switch.  It's an easy and worthwhile repair with the right part. The one special part needed: A specific $5 Switch There seems to be two types of switches used in these, based on the charging mechanism: For the Lithium models (CHV-1410L and similar), I notice that there are only two conductors are attached to the switch: one for &q
Read more

Other Posts

Show more