2017-06-20

Five reasons for running a dishwasher overnight

A few weeks ago I tried to wonder why I run my dishwasher overnight.  I set it to run at about 4 AM or 5 AM, and it finishes up by 6 AM or 7 AM or so.  Here's a conclusion of my analysis.

Electricity is more efficient overnight, and therefore costs less and emits less carbon.
Power companies produce less electricity at night due to lower demand.  During the day, they produce more electricity.

As for-profit entities, power companies want to use as little fuel as possible - after all, their biggest expense is fuel. So the plants that they run all the time are their most efficient plants, and the plants that they add during peak times - during the day - are their least efficient plants.

By running my dishwasher over night, I am guaranteed to be using the power by the most efficient power plants.

Winter Heat / Summer Heat
My dishwasher releases quite a bit of waste heat and moisture.  Most of that heat from the dishwasher stays in my house.  By running my dishwasher at the the early morning, all the heat released pretty much stays in my house, to keep me incrementally warmer right when I awake.

Similarly, I don't want that heat in my house in the summer during the peak of the hot weather.  By running it in the early morning, the dishwasher waste heat doesn't add to an already super-hot house.

Waste water
The waste water produced by my dishwasher gets dumped into the sewer earlier in the morning.  This avoiding the peak time of wastewater production.

Hot Water Heater Cycling
By running the dishwasher in the early morning, the hot water heater gets busy heating up replacement water right before I get up to take a shower.  This puts less thermal cycling on the hot water heater.

Noise
I don't want to hear my dishwasher run.  I don't hear it while I sleep in the bedroom.

Quick drying
I like to open the dishwasher right after its cycle so its contents - particularly plastics - dry quickly.  Since I get up as it is finishing its cycle, I am often there to open the door and let the ambient environment quickly dry its contents.  By the time I'm ready for work, I can empty the cool and dry contents of the dishwasher.

---

There we have it!  That's why I run my dishwasher overnight.  Perhaps each line item has an extremely tiny impact, but perhaps when taken in their totality they are a little less than tiny.  Let me know which ones you think are bull - and why.



2017-06-16

Fixing the bottom rubber of a mid-2010 or late-2009 MacBook

All my regular readers know that I love the late 2009 and mid-2010 white unibody MacBook notebooks.  They're robust, they're still very capable, and they can still run the latest MacOS.

One problem with these old beasts is the bottom rubber can detach.  Apple used to provide free replacements, but that program ended more than a year ago.

So what do you do to fix the bottom?  It's easy!  Here's what I did:
  1. Remove the bottom plate by removing the 8 bottom screws.
  2. Fully peel off the failed rubber and fully expose the aluminum.
  3. Use small pieces of permanent tape on the "back side" of the lid to cover the drill holes in the aluminum.
  4. Fully clean the "exposed side" of the aluminum plate.
  5. Apply small stick-on rubber feet to each corner.
  6. Coat the "exposed side" of the plate with several coats of Plasti-Dip spray paint.  I picked red, but there are many colors available.
  7. Re-attach the bottom plate to the laptop.
There we go!  Now I have a nice rubberized bottom plate once again.  It looks great, it is stable, and it only cost about a quarter can of rubber paint to repair.

2017-06-02

Avoiding Computer or iPhone Repair Errors.

I repair a lot of equipment - mostly smartphones and laptops.  I'm no genius and I have limited expertise.  But I do know how to do quality work - making sure that the result is no worse than where we started from.  I am happy to say that I've rarely made something worse.

Not everyone is so good.

I've acquired a lot of equipment that was ruined from "home repair" people.  Don't be that person.

Here are the things I've seen:
  • Missing components and screws.
  • "Lost" small parts floating around inside a machine.
  • Mistakenly disconnected cables.
  • Welded parts mistakenly pulled apart.

If you're going to do a home repair, do good work.  That means you need to be patient, triple-check your work, and use reputable procedures and guides (which universally means NOT YOUTUBE!)

Here are my tips:
  • Get good repair procedures well before you begin.  These should be written procedures with photographs.  Youtube is good, but is NEVER a substitute for good procedures.  And a lot of people that make Youtube videos are, um, idiots.
  • Read the repair procedures first and make sure you fully understand every step.  Make sure you have all the tools and workspace available to do the job right.
  • Use the right tools. Do not use the wrong tool.  If the tool is available on the market, BUY IT.  Using the wrong tool for the job is always stupid.  Only experienced experts should be fashioning their own tools.  Virtually all repair tools are inexpensive.  Buy them.
  • Keep organized.  Never ever jam the wrong screw into the wrong place.  Develop a system to prevent yourself from making mistakes.
  • Screws and parts are there for a reason.  Break a part during disassembly?  Replace it.  Lose a screw?  Find it and make sure it goes back in its place.  Did you remove adhesive?  It served a function.  Replace it.
  • Know your limits.  If you can't deal with something, bring it to a pro.  For example, I hate dealing with a lot of adhesives.  I'm happy to bring a device to a repair shop if it is affordable and it help me avoid the art of working with numerous strong adhesives. 
  • Know that not all those in the repair business is professional.  Choose your repair shop carefully.
Good luck!





Share